 |
 |
 |
|
Sled lift operates by hand or with electric drill. Simply slide the lift under sled from the front, position, and lift to desired height. Support bars have rubber pads to help secure load. Folds almost flat for storage. Does not include the optional wheel kit. Order separately (PN 10396).
Note: Check screw jack for grease before using. Some of these units have little or no grease on the screw, which may cause the lift to stick or even fail. Before using the product, grease the screw jack using the following procedure:
1. Punch out the spring pin and remove socket at one end of assembly
2. Remove and set aside thrust washer
3. Pull out screw assembly and then pull screw out from shaft asfar as possible
4. Apply coat of lithium grease to the screw
5. Push back screw and re-assemble
6. Drive spring pin back into place
A manufacturer's service bulletin is available for this procedure. |
|
|
|
|
|
|
|
|
