Want a great deal on track studs? These off-spec studs are good options for small shops or do-it-yourselfers looking for inexpensive studs for the wife's sled, the kid's sleds or for extra sleds. We got a great deal on a truckload quantity of these. These stainless steel push through studs are seconds and do not meet product specifications. Some have slight blemishes, are slightly long/short or have off-spec solder holding in the carbide pin tips. Some have oversize threads which can gall when nusts are installed, unless threads are lubricated first. Many are as good as OEM studs and are off-spec because an entire lot was rejected due to some quality control variable. Many people have used these with no problems at all. Even if you sort through them to weed out the problem ones (if any), you still can't beat this deal. We cannot tell one from another. 

 

Studs are 5/16" diameter with 7/8" diameter heads. Studs have carbide tips. Nylock nuts are included. Packs of 288 studs and nuts.

 

LIMITED QUANTITY. NO WARRANTY. NO RETURNS.

 

 

These are nominal sizes. Select based on track lug. For 1" track lug, use 1.250 stud to get approximately 0.25-0.30" penetration (past lug). Overall stud lengths:

 

 

1.000 stud is 1.320" overall and fits 0.820-0.850 track lug SOLD OUT

1.150 stud is 1.420" overall and fits 0.910-0.920 track lug SOLD OUT

1.250 stud is 1.500" overall and fits 1.000 track lug

1.400 stud is 1.720" overall and fits 1.250 track lug ALMOST SOLD OUT

 

 

Important: Apply lube to stud threads before installing nuts. Some of these seconds have slightly oversize root diameter.