|
One of our Most Popular Products!
Replace your old rotted wood dock decking with maintenance-free Dock-Top.
One Dock-Top 4x4 drop-in section includes 4 Dock-Top panels which can be assembled into one section for easy "drop-in" installation. Panels are connected with special connecting clips. Constructed out of glass reinforced copolymer with UV inhibitors added. Slotted design meets environmental criteria. Deep rib design for added strength. Panel section measures approximately 47-3/4" wide (across runway deck) x 47-1/4" long. Fits most aluminum, steel or wood docks with single center support. Flat support area at each end measures about 1-3/4" and at center measures approximately 1-7/8" to 2". Some dimensions will vary. Spans 24 inches.
No More Painting or Staining! Lightweight Drop-In Panels Feel Strong & Secure!
Optional Deck Lockers (order separately)
Dock-Top deck panels with the deep rib design provides a strong decking alternative that feels comfortable to bare feet. Many competing panels feel spongy or can curl at the edges when stepped on in the center. Perhaps most important, the Dock-Top surface is no-skid but is still comfortable with bare feet. Other panels feel like you ware walking on little knives. Dock-Top panels do not feel hot due to the neutral color.
You get 4 individual 12"x48" (nominal) panels and 6 Deck Connecting Clips for each 4x4 Dock-Top section ordered! It is fast and easy to assemble taking only a minute or two per section. All you do is lay the four panels upside down on a flat hard surface like a garage floor and tap the 6 connecting clips into place with a hammer. The clips are self-positioning and will not come off. No glue. No screws. No rods. The optional Deck Lockers are highly recommended for securely fastening panels to dock frame (we suggest 4 Deck Lockers per 4x4 Drop-In Section).
The deep ribs help keep the panel in place. Each 4x4 panel weighs about 24 lbs. The optional Deck Lockers provide security from blow off and shifting panels. Just twist the locking swivel to secure each section to the frame. You can add screws or plastic cable ties to "lock down" the panels, but these are generally not necessary. For permanent installations, connect 4x4 sections together using 2 more connecting clips (order seperately) between individual 4x4 sections to form a continuous "sheet".
At the end of the season, remove Dock-Top panels from the dock and stack and cover them. Although the Dock-Top has UV inhibitors added, you can prolong the life of the product by covering when not is use. Doc-Top panels have a 7 year limited warranty from the manufacturer, but with proper care, could last 15-20 years. Of course, this is also dependant on length of season (i.e. Minnesota vs Florida).
Panel Cross Section
Click the link "Larger Photo" above to view more images of the Dock-Top. For more details, go to www.dock-top.com.
Small quantities ship via FedEx or SpeeDee. Larger quantities ship on a 4x4 pallet via SpeeDee LTL (MN, WI, ND, SD, IA) or common carrier. If we ship by common carrier, it is usually much less expensive if we ship to the carrier's terminal and you pick it up there. If you don't like the listed shipping options for your location, call us and we will see what we can do.
|
