Our most popular dock wheel. These wheels have a slightly narrower tread width but have heavier wall thickness than many competing wheels. The narrower tread width on this plastic dock wheel is helpful in rocky terrain, but also works great for sand bottoms. Heavy duty plastic wheels are designed for all types of roll-in docks and boat lifts. Because they are made of heavy duty polyethylene, they will never wear out, won't rust on the shaft, roll easily on all terrains, will handle most types of docks, and require no maintenance. Suitable for roll-in kits and for shore end wheels on docks. These poly wheels are also suitable for boat lifts.

 

Tread has center spine for easy rolling on hard surfaces and cross bands for traction on soft ground. Four spoke design with strengthening inset panels. Elongated hub extends to one side of wheel for proper offset from axle support.

Specifications

Outside Diameter: 24"

Tread Surface Width: 7"

Hub Size: 4" outside diameter x 7" long

Shaft Size: 2" inside diameter (for 1-1/2" galvanized pipe)

Water Inlet/Drain Holes: Four 1/4" holes

Material: Virgin polyethylene with UV inhibitor

 

Color: Black

 

Material Thickness: Varies

 

Weight: 12 lbs

 

Capacity: 700 lb per wheel.

 

Specifications subject to vary. Shipping weight is slightly higher than actual weight due to dimensional weight shipping charges. Note that we may substitute a similar wheel that is about 1" wider, depending on inventory.